Sweep feature in solidworks 2016
At far right in the beginning of the helix line, sketch a Polygon with three number of sides ( Figure2.).
( vancouver gift vouchers figure 3).
Go to Feature on the command manger and select the arrow on Fillet and choose Chamfer.
Let's start: In this tutorial, you will design a bolt in you know bolts and screws are important little pieces that hold things from fall apart.Very helpful if you already spent a bit of time developing machining strategy, etc.It may take you from 5 to 15 min if you are a beginner, however, it can last for 3 minutes if you are professional on SolidWorks.Hi Everyone, Welcome to my tutorial new housing rebate quebec on modeling a bolt in SolidWorks.One of them is mine and the other one is from a user on.To complete this step you need to see an orange circle on the two red arrows.How on earth did you do this?
Under Cut-Sweep Feature, check Profile sweep.
You can force this mode using simple techniques.
Reminder usually after each steps, you should click ctrls to save market basket coupons and matchups 7/12 what you have done.SolidWorks is the one that we are going to use in this tutorial.In Inventor centerlines and construction lines are automatically different color, also each line in the sketch can have separate width, style or color.I changed it in my post.Maybe you have an experience and could compare these modes on large assembly drawings in both programs?